What Can You Actually Make on a Desktop 5-Axis Mill?
Real categories of parts a desktop 5-axis like the Pocket NC takes on — from titanium aerospace brackets to jewellery, impellers and fixtures — and why 5 axes is what makes them...
Artikel lesen →Journal
Journal
Ausführliche Texte zu 5-Achsen-Fräsen, EU-Fertigungslogistik und den Entscheidungen, die hinter jedem Pocket-NC-Kauf stehen.
Why a CycleCNC Maintenance Contract Pays for Itself in Year One
The numbers behind the annual maintenance contract — when it is the right purchase, when it is not, and what is actually included.
Artikel lesen →
Fusion 360 to First Chip: The Postprocessor Workflow
How a part in Fusion 360 becomes G-code that runs cleanly on a Pocket NC — and the three settings that get this wrong on first try.
Artikel lesen →
Pocket NC in University Machining Labs: A Practical Guide
What makes a desktop 5-axis mill the right teaching tool for engineering programmes — and the three accessories every lab should buy on day one.
Artikel lesen →
Setting Work Offsets in Kinetic Control: A Visual Reference
The four most-used work-offset workflows in Kinetic Control, with the keyboard shortcuts and one common gotcha that catches every new operator.
Artikel lesen →
Spindle Care on the Mafell ER11: A First-Year Schedule
Twelve months of disciplined spindle care, broken down into four quarterly checks plus the two things every operator should do daily.
Artikel lesen →
Tool Center Point Control (TCPC): The 60-Second Explainer
Why a 5-axis mill needs TCPC, what it actually compensates for, and how Kinetic Control handles it under the hood.
Artikel lesen →
Five-Axis Without the Five-Axis Tax: Why Desktop Mills Took Off
How a 60 × 60 cm desktop mill ended up doing first-article 5-axis work for European aerospace and medical R&D — and what it does not replace.
Artikel lesen →
First Chip on a V2-10: A 30-Minute Onboarding for New Owners
From unpacking the crate to the first finished part — the no-skip checklist that takes a brand-new V2-10 to a cleanly machined block in half an hour.
Artikel lesen →
V2-10 vs V2-50 CHB vs V2-50 CHK: Pick the Right Pocket NC
Three Pocket NC variants, three sweet spots. A practical decision tree that pairs each machine with the job it actually does best.
Artikel lesen →
Importing a Pocket NC into Germany: The 2026 Checklist
The five customs and power-system gotchas that catch every first-time EU buyer of a US-made desktop CNC mill — and how CycleCNC handles them out of Cologne.
Artikel lesen →
Bringing a Desktop CNC Mill into the EU: Customs, Power, and Local Support
If you're buying a US-made 5-axis CNC mill from inside the EU, three friction points show up: customs duty and VAT on import, AC power and grounding compatibility, and what happ...
Artikel lesen →