Free downloads · Direct from Penta Machine

Pocket NC Post Processors

Generate G-code that runs cleanly on the Pocket NC V2-10 and V2-50. Penta publishes the official post processors at no charge — we curate them here with EU-specific install notes and a German-language quick-start so you can be cutting in minutes.

€0 · No account required · Direct from pentamachine.com

Most downloaded

Fusion 360 / SprutCAM Post Processor

Universal post for Fusion 360 (HSMWorks engine), SprutCAM, and any CAM that accepts a `.cps` post file.

  • 5-axis output with A and B rotaries (V2-10) or A and B carrier (V2-50 CHB / CHK)
  • Configurable G54 work-offset table — defaults to G54 for standard fixturing
  • RPM cap aligned to the spindle option you selected at purchase
  • Linear feed-per-minute output (M3 / M5 spindle gates)
  • Compatible with both Pathpilot and Kinetic Control
Download .zip (Penta CDN) ↗ View on pentamachine.com

After unzipping, drop the .cps file into your CAM software's Post Library folder. Fusion 360: Manage → Post Library → Add to local library.

V2-50 Machine Schema / Digital Twin

Kinematic schema file for the simulator and for CAM packages that read external machine definitions.

  • Accurate axis layout, work-envelope bounds, and tool-to-work geometry
  • Loads into the simulator with one click
  • Useful in Fusion 360 for the new machine-setup workspace and collision avoidance
Download schema .zip ↗

Free starter G-code

A handful of test programs ship inside the post-processor zip above — useful for first cuts and toolpath verification.

  • Spiral first-cut program (matches the Pocket NC 101 walkthrough)
  • Probe-zeroing routines for ER11 / ER40 tooling
  • Air-cut acceptance test for new machine commissioning

Want production-ready programs with feeds, speeds, and Fusion 360 sources? See CycleCNC's curated library — €49, 20+ tested programs.

Quick-start install · 60 seconds

  1. Download the SprutCAM / Fusion 360 post zip above and unzip.
  2. In Fusion 360: Manage → Post Library → drag the .cps file in.
  3. In Manufacture workspace, set Machine → Pocket NC, then Post Process.
  4. Verify the output in our simulator before running on the machine.

Stuck? Email sales@cyclecnc.com with your CAM software and version — we'll send the matching post and tested feeds/speeds for your job within one working day.